Review WarmlyYours Snow Melt Sensor, Slab Mounted (120V)

• Facebook
• Twitter
• Line

Details: WarmlyYours Snow Melt Sensor, Slab Mounted (120V)

Brand: WarmlyYours

This slab-mounted snow sensor reliably detects snow and ice on concrete or Asphalt when used in conjunction with the scene-120 economy snow melt control. In particular, it detects moisture when the temperature is below 38 DegreeF. The sensor mounts in close proximity to the snow-melting cable to ensure the pavement and sensor become dry at similar time intervals. Maximum distance between the sensor and the control is 650 feet using 18 AWG wire. Note: sensor wire must remain separate from any high-voltage wire to avoid a Distorted sensor signal.

Buyer Guide De-Icers & Salt Spreaders

 If you’re shopping for a spreader, be sure to consider your needs first.

• Size and Weight. Consider where you will store the salt spreader. The spreader’s size will depend on the number of spreaders, but keep in mind the weight too.
• Purpose and Features. What type of spreader are you looking for? What features are important?
• Materials. You want a spreader made of a material that won’t rust or corrode.
• Weight Capacity. The spreader’s weight capacity should be equal to or greater than the weight of the salt, sand, or ice it will hold.
• Warranty. When purchasing a unit, inquire about the manufacturer’s warranty.

 

How to choose De-Icers & Salt Spreaders

Salt spreaders and de-icers are essential tools to have on hand during the winter months. If you’re worried about getting stuck out in the cold this winter, then read on.

• Consider your salt needs. How much salt do you typically need? Salt spreaders and de-icers come in all different shapes and sizes. If you have a small driveway or a small family, a small, handheld de-icer might be the best option for you.
• Is battery life important? Some de-icers can be battery-powered, which can be useful if you’re stuck outside in a snowstorm. However, some battery-powered de-icers aren’t very portable, and using them can be inconvenient.
• Consider which type of salt to use. If you live in an area that has salt brine, then you’ll want to consider keeping a bag of salt brine on hand so you can use it on icy surfaces.
• Do all de-icers require manual activation? Some de-icers require manual activation, while others use motion sensors. Manual activation de-icers can take a little bit of time but require no battery power. Motion sensors require battery power, but you can start them as soon as you step outside.

How to maintain De-Icers & Salt Spreaders

Salt spreaders and de-icers are a great way to get clear, clean roads in the winter. However, if you use these products, it’s important to keep them clean so they don’t accumulate debris or ice.

• Rinse the spreader or de-icer. Before each use, rinse the salt spreader or de-icer thoroughly with warm water. Check the manufacturer’s directions for rinsing instructions.
• Wash the spreader or de-icer. After each use, wash the salt spreader or de-icer with warm water and dish soap.
• Dry the spreader or de-icer. After washing, dry the spreader or de-icer.
• Store the spreader or de-icer. Before storing, rinse the spreader or de-icer well with warm water. Then, store the spreader or de-icer.

---

 

• Facebook
• Twitter
• Line