Page Contents
Details: TruMelt 10% Magnesium, Premium Ice Melt, Pet and Plant Friendly, 50 lbs
Brand: Ernst Grain’s
TruMelt 10% magnesium is a premium blend of 90% oven-dried, screened sodium chloride, and 10% magnesium pellets. Being a premier choice for commercial and residential applications, TruMelt 10% melts effectively down to a low temperature of -10°F due to the inclusion of 10% magnesium. TruMelt 10% is screened to optimal crystal size for maximum traction and accurate spreading. Having the small dusty fines and large crystals above ¼ in diameter removed, TruMelt 10% is clump-free, making it easy and efficient to apply. TruMelt 10% is lightly tinted with a non-staining green dye to enhance accuracy and visibility and is safe for use on sidewalks and concrete surfaces. TruMelt 10% is also safer for pets and turf than calcium-based products due to the gentle nature of the magnesium pellets. If applied at recommended rates, it will not burn vegetation or pet’s paws. TruMelt 10% is safer for concrete than other less concentrated blends due to its low freezing point. Using 10% magnesium pellets lowers the freezing point, minimizing freeze/thaw cycles and providing greater protection against spalling and chipping.
Advantages
- Products can be returned
- Make sure this fits by entering your model number.
- Melts to -10°F
- Free flowing
- Pet and plant safe
- Increased concrete safety
Notice
- Is an online purchase
- Delivery may be delayed in some areas.
Buyer Guide De-Icers & Salt Spreaders
If you’re shopping for a spreader, be sure to consider your needs first.- Size and Weight. Consider where you will store the salt spreader. The spreader’s size will depend on the number of spreaders, but keep in mind the weight too.
- Purpose and Features. What type of spreader are you looking for? What features are important?
- Materials. You want a spreader made of a material that won’t rust or corrode.
- Weight Capacity. The spreader’s weight capacity should be equal to or greater than the weight of the salt, sand, or ice it will hold.
- Warranty. When purchasing a unit, inquire about the manufacturer’s warranty.
How to choose De-Icers & Salt Spreaders
Salt spreaders and de-icers are essential tools to have on hand during the winter months. If you’re worried about getting stuck out in the cold this winter, then read on.- Consider your salt needs. How much salt do you typically need? Salt spreaders and de-icers come in all different shapes and sizes. If you have a small driveway or a small family, a small, handheld de-icer might be the best option for you.
- Is battery life important? Some de-icers can be battery-powered, which can be useful if you’re stuck outside in a snowstorm. However, some battery-powered de-icers aren’t very portable, and using them can be inconvenient.
- Consider which type of salt to use. If you live in an area that has salt brine, then you’ll want to consider keeping a bag of salt brine on hand so you can use it on icy surfaces.
- Do all de-icers require manual activation? Some de-icers require manual activation, while others use motion sensors. Manual activation de-icers can take a little bit of time but require no battery power. Motion sensors require battery power, but you can start them as soon as you step outside.
How to maintain De-Icers & Salt Spreaders
When caring for your salt spreader or de-icer, it’s important to make sure that you clean it properly after each use.- Remove the salt: Before you begin cleaning your salt spreader or de-icer, first remove the accumulated salt. If the salt is hard to remove, use coarse salt or kosher salt to remove most salt buildup.
- Clean the salt spreader or de-icer: Fill your sink with warm, soapy water and add your salt spreader or de-icer. Use a toothpick or long-handled sponge to scrub the spreader or de-icer thoroughly.
- Remove excess salt: Rinse your salt spreader or de-icer thoroughly. If the salt remains stuck, soak it in warm, soapy water overnight, or soak it in a tray of baking soda and water for an hour, then rinse it.
- Dry the salt spreader or de-icer: Lay your salt spreader or de-icer on a towel to dry. To avoid rust, do not leave your salt spreader or de-icer exposed to the air.
- Store the salt spreader or de-icer: Store your salt spreader or de-icer in a place where it will not be exposed to extreme temperatures or moisture.


