Review Ariens 938032 Path Pro 21-in. Single-Stage Snow Thrower, 208cc AX Engine, Electric Start – Quantity 1

• Facebook
• Twitter
• Line

Details: Ariens 938032 Path Pro 21-in. Single-Stage Snow Thrower, 208cc AX Engine, Electric Start – Quantity 1

Brand: Ariens

Path-Pro SS21, 21″, Single Stage 208E Sno-Thro, 208cc 9.5’/LB, AX208 Engine, 120V Push Button Electric Start, 21″ Clearing Width, 12.2″ Intake Height, Folding Ergo Handlebar, Rubber Paddles and Adjustable Scraper Bar, 8″ Semi-Pneumatic Wheels, Manual Chute Control With Manual Deflector, 35′ Throwing Distance, Uses Standard Outdoor Extension Cord Not Included, 3 Year Limited Warranty.

Buyer Guide Snow Blowers

Winter has finally arrived! It’s time to get the snow blower out of the shed and clean up the snow. Don’t fall prey to flashy advertisements. Instead, spend some time reviewing the features and specifications of each model.

• Look for snow blowers that are lightweight. This is particularly relevant if you plan on using a snow blower on a regular basis.
• Look for a snow blower with a curved chute. These chutes bend more naturally, making it easier to shovel the snow into the snow thrower.
• Look for a snow blower with a 12-inch chute.
• Look for a snow blower with a 12-inch clearance. This is helpful because it enables you to clear more snow with less effort.
• Look for a snow blower with a 15-inch clearing width.
• Look for a snow blower with a 7.5-inch turning radius.
• Look for a snow blower with a 25-inch cutting width.

How to choose Snow Blowers

1. Size – consider the size of the area you need to cover
2. Storage – if you have a shed, garage, or basement, how much room do you have to store your snow blower
3. Throw Distance – how far do you want to throw the snow
4. Features – do you have an in-ground irrigation system?
5. Warranty – all snow blowers come with some sort of warranty, whether it is 1 year, 2 years, or lifetime

How to maintain Snow Blowers

1. Oil your Snow Blower – the best oil is WD40
2. Check all belts and tighten them
3. Check the water – if it’s dirty, clean it with a wire brush or hose it off
4. Check the spark plug – make sure it’s clean and waterproofed
5. Check the carburetor – it needs to be cleaned with a wire brush and sprayed with WD40
6. Check the air filter – clean it with a wire brush and spray with WD40
7. Change the oil and spark plug
8. Check the tires – make sure they have enough air

---

 

• Facebook
• Twitter
• Line