Review Ignition Coil Module For Troy-Bilt Storm 2410 24-in Two-stage Snow Blower

• Facebook
• Twitter
• Line

Details: Ignition Coil Module For Troy-Bilt Storm 2410 24-in Two-stage Snow Blower

Brand: Generic

Buyer Guide Snow Blower Replacement Parts

 Buying Snow Blower Replacement Parts

• Consider your intended use.
• Look at the appliance’s size. Snow blowers come in different sizes. Smaller blowers are best for walkways and sidewalks, while larger blowers are best for large driveways or open spaces.
• Look at the appliance’s weight. Snow blowers weigh 60 to 150 pounds. Shop around for models that weigh as little as 30 pounds.
• Look for features that are important to you. Snow blowers come equipped with various safety features. Look for a blower with an automatic shut-off switch, which shuts the machine off when an obstacle is detected.
• Select a wattage. Snow blowers come in wattages ranging from 1,500 to 3,000. The wattage of blowers is largely determined by the size of the machine.
• Consider blower features. Some blowers come with storage baskets. Look for blowers with wheels for maneuverability. Look for blowers with headlights and reflectors.

How to choose Snow Blower Replacement Parts

 If you live in a cold climate, you know how beneficial having a snow blower can be. However, most snow blowers have a limited lifespan, and parts need to be replaced eventually.

• Look for parts that are compatible with your snow blower’s make and model. Some replacement parts, such as air filters, gas cans, and chutes, are available as universal parts that will fit most snow blowers. However, other parts, such as augers, are specific models and may not be compatible with other snow blowers.
• Make sure the replacement parts will fit your snow blower. Some replacement parts are designed to fit certain snow blowers; others may not. Always check the dimensions of the snow blower’s chute, auger, and handle, as well as the width and length of the blades, before purchasing replacement parts.
• Consider the warranty. Some replacement parts come with a warranty from their respective manufacturers.

How to maintain Snow Blower Replacement Parts

 Snow blowers — the outdoor power equipment that churns up snow — are a must-have for winter, but upkeep can be a challenge.

Snow blowers can run on gas or electricity, and while gas and electric-powered models have their differences, the maintenance that goes into keeping these outdoor power equipment running is pretty much the same.

First, you should regularly have a professional tune-up done, especially if you use your snow blower often. Regular tune-ups will help you avoid small problems turning into larger ones.

Although snow blowers do require regular upkeep, there are some things you can do yourself — like replacing the spark plug and the oil — to keep the machine running smoothly.

1. Replace the spark plug.

A spark plug is a small metal component that ignites the fuel mixture in the engine. Over time, the spark plug may wear down, preventing the engine from starting.

To replace the spark plug, first, remove the snow blower from the storage area and loosen the spark plug wire. Then, use a spark plug socket to unscrew the old spark plug and screw in a new one.

2. Change the oil.

The oil in a snow blower keeps the moving parts of the machine running smoothly, lubricating them and preventing them from getting too hot and wearing them down.

To change your oil, remove the snow blower from the storage area and locate the oil reservoir. In most cases, the oil reservoir is located behind the engine or near the bottom of the machine. Use a funnel to fill the reservoir. Then, replace the snow blower cover and tighten the bolts.

3. Change the air filter.

In addition to lubricating the moving parts, the oil also keeps the air passing through the machine’s air filter clean. Over time, the filter can become clogged up with

---

 

• Facebook
• Twitter
• Line