Review LCD-8 24VAC Snow Melting Controller

• Facebook
• Twitter
• Line

Details: LCD-8 24VAC Snow Melting Controller

Brand: ETI

ETI (Environmental Technology Inc.) Snow Switch P/N: 24781 – Configurable Automatic snow & ice melting controller – 24VAC model for hydronic, building automation applications The ETI LCD-8 24VAC Configurable Aerial Snow Melting and Deicing Control makes automatic melting a cost effective alternative in even the smallest residential and light commercial snow melting applications. The control turns on snow melting heaters when precipitation occurs at temperatures below 38F (3.3C) and remains on for an adjustable hold-on time (3 hour default) after precipitation stops to ensure complete ice and snow melting. The controller includes an internal magnetic reed switch used for manual heater cycling, as well as configuring the temperature set point and the hold-on time. The redesigned, patent pending, rugged polycarbonate enclosure provides excellent protection at temperature extremes, while allowing snow to shed to prevent iglooing over the moisture sensor. Hold-on timer continues heater operation after snow stops to ensure complete melting. Sno-Test automatic testing and manual heater cycle for system testing. Simple four-wire installation. Minimum energy cost. C-UL-US Listed for Temperature Regulating Equipment. Application Information The hold-on timer can be configured for off, 1 hour, 3 hours or 5 hours. The operating temperature can be configured for none (precipitation sensor), 36degF, 38degF or 40degF. The low-temperature lockout (17degF), which disengages unit operation, can be enabled or not. Default configuration: 38degF operating temperature, 3 hour hold-on time; no lockout.

Buyer Guide De-Icers & Salt Spreaders

 If you’re looking for a salt spreader or de-icer, here are a few things you should keep in mind.

• Are you spreading salt on a road, on an airfield, in a parking lot, or on a walkway?
• Product Rating. Salt spreaders and de-icers are rated according to how durable they are. A higher-rated product will be more durable.
• Capacity. How much salt are you spreading? A single-cell de-icer is 4.2 lbs., whereas a 6-cell de-icer is 26 lbs.
• Weight. Weight is mostly related to portability and ease of use. If portability isn’t an issue, most salt spreaders and de-icers will be light enough to carry.
• Salt Type Required. The salt type required varies by application. If you’re spreading salt on a road, you should be using rock salt. If you’re spreading salt on an airfield, you should be using regular salt. If you’re spreading salt on a parking lot, you should be using fine-grade salt.

How to choose De-Icers & Salt Spreaders

Salt spreaders and de-icers are essential tools to have on hand during the winter months. If you’re worried about getting stuck out in the cold this winter, then read on.

• Consider your salt needs. How much salt do you typically need? Salt spreaders and de-icers come in all different shapes and sizes. If you have a small driveway or a small family, a small, handheld de-icer might be the best option for you.
• Is battery life important? Some de-icers can be battery-powered, which can be useful if you’re stuck outside in a snowstorm. However, some battery-powered de-icers aren’t very portable, and using them can be inconvenient.
• Consider which type of salt to use. If you live in an area that has salt brine, then you’ll want to consider keeping a bag of salt brine on hand so you can use it on icy surfaces.
• Do all de-icers require manual activation? Some de-icers require manual activation, while others use motion sensors. Manual activation de-icers can take a little bit of time but require no battery power. Motion sensors require battery power, but you can start them as soon as you step outside.

How to maintain De-Icers & Salt Spreaders

Salt spreaders and de-icers are a great way to get clear, clean roads in the winter. However, if you use these products, it’s important to keep them clean so they don’t accumulate debris or ice.

• Rinse the spreader or de-icer. Before each use, rinse the salt spreader or de-icer thoroughly with warm water. Check the manufacturer’s directions for rinsing instructions.
• Wash the spreader or de-icer. After each use, wash the salt spreader or de-icer with warm water and dish soap.
• Dry the spreader or de-icer. After washing, dry the spreader or de-icer.
• Store the spreader or de-icer. Before storing, rinse the spreader or de-icer well with warm water. Then, store the spreader or de-icer.

---

 

• Facebook
• Twitter
• Line